V2 Pure 50 Reverse Osmosis Unit 8L/hr Product Details:
V2 Pure 50 is a high quality reverse osmosis system capable of producing up to 190 litres per day of pure water. Eliminates up to 95% of all of salts and heavy metals, 99% of chlorine and sediments down to 5 microns.
The V2 Pure 50 reverse osmosis unit is designed to lower the PPM / EC, remove chlorine and sediment from your water supply. Water with a lower EC 0.0 - 0.2 allows much more of the correct nutrients to be fed and absorbed by your plants. Chlorine and sediment free water is essential to growing healthy plants and maintaining beneficial micro organisms, bacteria and fungi in your root zone and growing media. These microbes cannot survive in the presence of chlorine.
Make the change to reverse osmosis pure water for faster growth, healthier plants and stronger plant roots. You will be amazed and wish you had done it sooner.
Water usage with the V2 Pure 50 reverse osmosis system has been optimised to achieve up to 60% waste water / 40% pure water. If needed 10-20% tap water can be added to aid pH stability.
V2 Pure 50 Reverse Osmosis units are supplied complete with Inlet tubing, connectors, carbon filter, reverse osmosis membrane, Pressure gauge, Outlet tubing and Shut-off valve. A float valve can be purchased separately to top up tanks or reservoirs automatically.
CHANGE FILTERS: RO Membrane 6 months - 2 Years (depending of usage and input EC level), Carbon Filter every 6 months
IMPORTANT: A minimum of 3.5bar 50 psi is required to operate the system properly. To increase water pressure a booster pump kit is available separately. Do not install the system where the incoming water pressure higher than 5.5bar / 80psi, pressure can be reduced by installing a pressure regulator. Only use with cold water supply, hot water will damage the filters and membrane. Protect unit against frost.
How to install the V2 Pure 50 Reverse Osmosis unit:
Full detailed instructions are supplied with each unit, the basics of installation are as follows.
1. Install cold water supply
2. Install drain adapter
3. Make tubing connections
4. Put system into operation